The Ultima Evolution pop up stand is a quality system with superb build quality. The wider gauge tubing on the Ultima Evolution system means that the frame itself has less flex in it's upright position and therefore graphic panels tend to require less adjustment in order to achieve the perfect fit.
The quick fix Evolution pop up includes magnetic locking arms and aluminium magnetic fixing bars which shaves off several minutes from assembly time whilst increasing reliability through cutting down on the amount of clips/catches used.
The Evolution pop up can be supplied with either printed panels or loop nylon panels (fabric). If purchasing a stand with loop nylon panels you can fasten your own prints and posters to the 'skin' with hook type velco fasteners (see downloadable data sheet at bottom of this page for the range of available fabric colours).
- Manufactured by Ultima Displays, part of the Nimlock Group
- Manufacturers 10 year guarantee
- Robust Aluminium Frame
- quick Fix magnetically attached aluminium fixing bars
- Compatible with a range of lights and accessories
- Standard frame height 2280mm tall (assembled size)
- Sets up in just minutes with no tools required
- Frames available in a variety of widths and 3 height options
- Selection of pop up transit cases available to make transport and storage even easier
Pricing. See table below for clear panel dimensions on all frame sizes or download the data sheet for diagram views)
check out our special offers page for great package deals on this system!
Frame Size |
Frame Only |
Frame & Loop Nylon Panels |
Frame & Printed Graphic Panels |
1 x 3 |
£150 |
£380 |
£380 |
2 x 3 |
£204 |
£500 |
£500 |
3 x 3 |
£299 |
£550 |
£550 |
4 x 3 |
£399 |
£735 |
£740 |
5 x 3 |
£499 |
£840 |
£840 |
add £50 per frame for straight system
Panel Dimensions. These dimensions show the number and size of all panels for each frame size. For assembled sizes please download the data sheet below.
Frame Size |
Straight System (flat wall) |
Curved System (concave wall) |
Frame height options |
1 x 3 |
3 panels in total (2 D-End sections at 673mm wide, 1 front panel at 732mm wide)
Total artwork size 2078mm wide x 2225mm tall
|
3 panels in total (2 D-End sections at 673mm wide, 1 front panel at 673mm wide)
Total artwork size 2019mm wide x 2225mm tall
|
standard frame: 2225mm tall graphic size (2280mm assembled)
|
2 x 3 |
4 panels in total (2 D-End sections at 673mm wide, 2 front panels at 732mm wide)
Total artwork size 2810mm wide x 2225mm tall
|
4 panels in total (2 D-End sections at 673mm wide, 2 front panels at 673mm wide)
Total artwork size 2692mm wide x 2225mm tall
|
standard frame: 2225mm tall graphic size (2280mm assembled) |
3x3 |
5 panels in total (2 D-End sections at 673mm wide, 3 front panels at 732mm wide)
Total artwork size 3542mm wide x 2225mm tall
|
5 panels in total (2 D-End sections at 673mm wide, 3 front panels at 673mm wide)
Total artwork size 3365mm wide x 2225mm tall
|
standard frame: 2225mm tall graphic size (2280mm assembled) |
4x3 |
6 panels in total (2 D-End sections at 673mm wide, 4 front panels at 732mm wide)
Total artwork size 4274mm wide x 2225mm tall
|
6 panels in total (2 D-End sections at 673mm wide, 4 front panels at 673mm wide)
Total artwork size 4038mm wide x 2225mm tall
|
standard frame: 2225mm tall graphic size (2280mm assembled) |
5 x 3 |
7 panels in total (2 D-End sections at 673mm wide, 5 front panels at 732mm wide)
Total artwork size 5006mm wide x 2225mm tall
|
7 panels in total (2 D-End sections at 673mm wide, 5 front panels at 673mm wide)
Total artwork size 4711mm wide x 2225mm tall
|
standard frame: 2225mm tall graphic size (2280mm assembled) |
All prices exclude vat & delivery where appropriate
Graphics are printed at 1440dpi onto heavyweight Opal Jet stoplight polyester film and are laminated with crystal finish film
Click here to view the range of cases available for this stand
Click here to view the range of lighting available for this stand
Download Data Sheet - Sizing
Download Data Sheet - Assembly Instructions - Straight System
Download Data Sheet - Assembly Instructions - Curved System
Download Data Sheet - Optional Shelving Unit - Straight
Download Data Sheet - Optional Shelving Unit - Curved
Download Data Sheet - Optional Stablising Feet
Download Data Sheet - Light Fitting
Download Data Sheet - Fabric Colour Swatchbook
| Pop Up Assembly is quick and simple
Step 1 - unpack the frame
Step 2 - open out the frame and it 'pop's up'
Step 3 - the frame is now extended to make a backwall onto which your fabric or printed graphics attach
Step 4 - clip the magnetic bars
Step 5 - the panels hook onto special fixings at the top of the frame and grip magnetically to the bars
Step 6 - all the panels are on and you have a professional display backdrop. You can add lights or can even upgrade your case and use it as a stand alone table top!
|
