I used Printdesigns for the first time not knowing what to expect. However, I was really impressed with the quality of the 6 budget pop-up banners I bought and how quickly they were produced and delivered on time. They kept me informed via email at every stage including approval of the artwork. I chose to pay by phoning them and was dealt with by a professional and friendly lady. Excellent service, a good quality product even though it was a 'budget' item – outstanding value. I would genuinely recommended them based on my experience. Top job.
The Stealth banner flexible kit is ideal for those customers who require a larger, yet flexible exhibition display backdrop. The stand can be manipulated into a straight or curved shape to suit your available space.
The Stealth Banner Stand flexible kit is the ideal solution for those who require a versatile, yet portable display for exhibition or event use.
The Flexible Stealth Banner kit compromises of two 800mm wide Stealth banner stands with a single 600mm wide interlinking panel. The arrangement of stands can be made so the wall is flat or curved by adjusting the angle that the 800mm wide straight stands sit in relation to the flexible centre panel.
The Stealth flexible banner stand kit is ideal for creating a flat backwall with a width of 2.2M or a variety of concave, convex or even L-Shaped walls.
The Stealth banner flexible kit compromises of:
2 x Stealth Banner Bases
2 x Twist and Lock Pole
3 x Full Colour Printed Graphic Panels (from your own artwork or we can design for you)
Durable Carry Bags for Bases
Optional Storage Drum for Graphic Panels Available
Optional Graphic Storage Drums are Available. We recommend the 300mm diameter x 1040mm graphic storage drum which will accomodate all three printed panels for the Stealth banner flexible kit. If you do not requre a graphic storage drum, your printed panels will be supplied packed in bubble wrap and inside a suitable cardboard box.
Stands are supplied ready to use.
For information, help and advice regarding building larger Stealth banner stand walls please just call and one of our team will be happy to discuss your requirements and offer an obligation-free quote.
Graphics for Stealth Banner Stands are printed on heavyweight Opal Jet polyester stoplight film. Graphic panels are overlaminated with a crystal, scratch resistant overlaminate finish for durabilty. Print resolution is 2440dpi and graphics are UV stable (non-fading).
How To Supply Your Artwork
For those customers who wish to provide their own artwork for printing, detailed instructions and artwork templates in Quark and Illustrator formats are available from the download tab above. The physical print dimensions are also provided below.
Should you require any help with the graphic design of your banner stand, you can email your requirements to our graphic designer by clicking here. Our designer will usually come back to you within a few hours to discuss your requirements and to provide an obligation-free quote.
Artwork Setup Sizes
Size:2200mm wide x 2000mm page size. Made from two Stealth banners at 800mm wide each and one inter-linking panel at 600mm wide. Please supply artwork as one 'spread' which we will break into sections for printing.
Resolution:We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.
Colour Mode:Supply artwork in CMYK mode only
Files types supported: Please save files as JPG, Tiff or PDF