X Banner Stand

Empty

Budget X Banner Stand

The budget X Banner Stand is our entry level tensioned rod banner stand and is very light, weighing in at 2kg including the print.

Display all pictures

In the same category

If you are looking for a stand which has easy graphic changeover and is cost effective and lightweight then the X banner is an ideal solution. The X frame itself is comprised of 4 poles which are held together when in use via a central hub.

When the stand is assembled, the graphic is attached by hooking the metal eyelets which are located in each corner of the print over the nodes on the X frame.

Because the print is not permanently attached to the frame it makes graphic changeover simple! You just need to order new prints for your existing stand. They will come supplied with eyelets and will be ready to use.

The poles are supplied with a lightweight carry bag, an optional 850mm tall graphic storage tube and replacement graphics are available to purchase under the accessories tab

The printing is produced using a state of the art Vutek UV printer. This £250,000 machine allows us to capacity to produce over 100 finished stands per day and the UV cured ink contains no VOC's (solvent compounds) which are damaging to the environment.

Compact Design
UV cured printing process means print is waterproof, fade resistant and environmentally friendly
Photographic print quality onto durable blockout material (600gsm)
Lightweight stand with easy graphic changeover
You can download your own fire rating certificate at the download section below.

Artwork Requirements

Size: 800mm wide x 1800mm page size.

Resolution: We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.

Colour Mode: Supply artwork in CMYK mode only

Important Info: The eyelets are punched into the corners of the graphic approximately 25mm in from each edge, so make sure sure you keep any logo's or images you wish to be fully seen away from these areas.

Files types supported: Please save files as JPG, Tiff or PDF