Replacement Banner Graphic - Cobra
Replacement print for Cobra Banner Stand
Replacement graphics for your Cobra banner stand - rails not included
About the product
Our Cobra replacement graphics are printed onto a 510gsm tear-resistant fire-rated blockout PVC which means you will not be able to see a shadow of the pole through the graphic. We use a UV flatbed printer so the inks won't fade or run and our inks don't contain VOCs which are harmful to the environment. If you return your existing Cobra banner stand graphics to us we can remove the old rails and attach them to the new graphics. If you wish to keep your old graphics aswell, please be sure to tell us.
Artwork Requirements -
- Size (HxW) - 2100 x 800mm
- Resolution - We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.
- Colour Mode - Supply artwork in CMYK mode only
- Important - Please note that the gripper rails at the top and bottom
- File Types - Save file as JPG, TIFF or PDF
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High