Replacement Banner Graphic - Quickroll Classic
Replacement for 2 sizes of the 'Classic'
Replacement graphics for your existing Classic stand - base unit not included.
About the product
The replacement graphic for your existing Quickroll Classic stand comes fitted with a top rail.
An instruction sheet will be supplied showing how to change the graphic, or you can view it in the attachment. Templates can be found in the download tab.
Artwork Requirements -
- Size (HxW) - 2150 x 850mm or 2150 x 1000mm
- Resolution - We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.
- Colour - Supply artwork in CMYK mode only
- Important - The bottom of 200mm of the 2150mm page height is non-viewable and you should ensure that all viewable information is raised up, above this region of the artwork. We suggest that the background colour or any background images run all of the way into the non viewable region down to the bottom of the page.
- File - Save file at JPG, TIFF or PDF
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Downloads
-
Quickroll Classic Artwork Template 850mm (423 Kb)
-
Quickroll Classic Artwork Template 1000mm (421 Kb)