Replacement Graphic - Bamboo X Banner
Option for two different materials
- Replacement graphic for the Bamboo X banner stands
- Choice of print material
- New graphics supplied with eyelets - ready to use
- Fade resistant and environmentally friendly
About the product
Our Bamboo X Banner graphics are printed onto a 600gsm tear-resistant fire-rated blockout PVC which means you will not be able to see a shadow of the pole through the graphic. We use a UV flatbed printer so the inks won't fade or run and our inks don't contain VOC's which are harmful to the environment. We also produce a printed graphic on a lightweight textile which can be washed and easy to maintain.
Graphic only supplied.
Artwork Requirements -
- Size (HxW) - 1800 x 600mm
- Resolution - We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.
- Colour Mode - Supply artwork in CMYK mode only.
- Important Info - X Banner graphics are finished with an eyelet at around 25mm inset from each corner. Please bear this in mind when setting up your artwork. The nickel plated eyelets are silver in colour and allow for the new panel to hook over your existing X banner frame.
You should confirm costs with us by phone before ordering if the size of the print you require is different or you originally purchased your X Banner from another supplier.
Specification
Environmental
Printing:
- Dye sublimation onto stretch polyester fabric
- No Solvents (VOC's) used in printing process
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Dye-sublimation
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High