Replacement Print - Storm Hydro 2 Banner Stand
Replacement print for Storm Hydro 2 banner stand
The graphic for the Storm Hydro 2 banner stand are printed using UV cured ink onto 600gsm blockout material. On request, we can also print onto mesh material which is perforated with holes so wind can diffuse more easily. Please note that the graphics on normal banner material will have greater vibrancy as compared to mesh material.
Artwork Requirements -
- Size - 1800mm (h) x 800mm (w)
- Resolution - We suggest no less than 150dpi at full size. Please increase accordingly for any enlargements
- Colour Mode - Supply artwork in CMYK mode only
- Important info - The banner has eyelets positioned approximately 30mm in from each corner. Please avoid important information around these areas
This is a replacement print for a Storm Hydro 2 outdoor banner stand.
Please note that this cost is for the print and does not include the stand.