IllumiGo Freestanding Lightbox

Only %1 left
Available in 2M x 1M or 2M x 2M size. Free Standing Lightbox with simple 'no tools' assembly
  • Freestanding lightbox with tensioned fabric graphics
  • Packs away into compact cardboard carton for transport
  • Bright LED illumination for high impact graphics
  • Can be single or double sided
  • Assembles in 5 minutes with no tools required
  • Comes with mains UK 3-pin plug
As low as £504.00 £420.00

Seen it cheaper?

Challenge us to beat that price!

Contact our sales team now
Order and submit artwork within to get it by...
  • Friday 2nd Auguststandard
  • Tuesday 6th Augusteconomy
  • Tuesday 30th Julyexpress

IllumiGo freestanding lightbox displays provide all the benefits of a modern tensioned fabric lightbox in a format that has been cleverly engineered in order to be as easy to assemble and transport as possible. The illumiGo lightbox frame utilises integrated LED lighting to facilitate high-impact illuminated graphics guaranteed to draw maximum attention at exhibitions, events and conferences. IllumiGo lightboxes can also be utilised in retail locations as a promotional advertising lightbox whereby graphics are fast and easy to replace when required. IllumiGo lightboxes are available in a choice of 1M and 2M widths with a standard height of 2M

Why not take a look at our IllumiGo Display Brochure for information about other products in the IllumiGo range?


   Fast & Simple Assembly

Traditional tensioned fabric lightbox displays can be time-consuming and laborious to assemble because each section of the frame has to be connected together manually with tools. Furthermore, traditional freestanding lightboxes contain parts that can be easy to misplace or lose.

The IllumiGo Lightbox is specifically designed to be as fast and simple to assemble as possible by utilising a simple push-fit design with no small fastenings.



   Integrated LED Edge Lighting

Powerful LED lights are built into the top and bottom horizontal sections of the IllumiGo display. These LEDs provide a curtain of bright light that fills the interior of the frame. The wiring connections for the lights are built into the frame and take only a few seconds to connect.

When graphics are attached to the front or rear of the frame, they are evenly illuminated from the reverse. It is possible to attach graphics to one or both sides of the frame depending on whether you require a single or double-sided display.


   Freestanding Design

The IllumiGo lightbox is a free-standing system that can be used in almost any indoor location.

Two twist-open support feet provide a high degree of stability making this display suitable for use in public spaces and high-traffic environments such as exhibition halls, receptions and retail environments.

Power is provided to the frame via a recessed socket on the underside of the base for neatness. The supplied power transformer comes with a 4 M-long lead.


   Lightweight Frame

IllumiGo freestanding lightbox frames are made from a lightweight, aluminium profile. The frame is finished with a gloss white power coating for a clean and elegant look.

Designed for ease of construction and portability, the IllumiGo display weighs only 8.4KG for the 1M wide version including the power transformer making it lighter than many comparable freestanding lightbox solutions.


   Easy Carry Packing Box

All of the IllumiGo frame components and printed graphics are packed away into a reusable bespoke packing box with a carry handle.

The box contains foam cut-out sections so each piece of frame can be securely stored and transported minimising the risk of damage to the components.

The packing box even features easy-to-follow assembly instructions that are printed onto the inside of the lid for reference.

Packed weights

2M x 1M IllumiGo Lightbox: 8.4KG (frame excluding prints)

2M x 2M IllumiGo Lightbox: 17.2KG (frame excluding prints)


   Easy Fit Fabric SEG Graphics

Our IllumiGo graphics are printed onto specialist backlit fabric for optimum results when backlighting. Graphics are sewn with a silicone edge beading and push fit into the perimeter of the frame.

SEG (silicone-edged graphics) provide a frameless appearance as they run edge to edge on the frame. You can choose to have a graphic on one or both sides for a single or double-sided display. We provide a black blockput panel with all single-sided displays for the rear of the frame as standard.

Our printed graphics are made from polyester fabric so they can be recycled with other textiles. You can order extra prints anytime should you wish to update your display.


IllumiGo Lightboxes Now Available in 2M x 2M Size

IllumiGo lightboxes are now available in a larger 2M wide size. Vibrant and impactful, the iLLUMiGO 2x2 is the latest addition to the iLLUMiGO family and benefits from the toolless ‘plug and play’ features of the original design. Standing 2010 x 2000mm, the double-sided edge-lit LED lightbox has four twist-out feet for extra stability and the 100mm deep profile is finished with a white powder coating giving it a sleek clean look.

The 2M x 2M lightbox packs away in a branded box and is convenient to transport and store. Perfect for use at small events, product launches, and conferences to attract attention. It is also an ideal back wall solution for exhibition shell-scheme deployment as an alternative to a pop-up stand. Its portable nature means it can be reused again and again and when not in use at an event redeploy in a reception area or showroom to maximise use.  

Illumigo 2x2 lightbox Illumigo 2x2 lightbox frame

All IllumiGo Display Graphics Are Not The Same

Backlit display graphics from some suppliers are printed with liquid ink that is dried or cured to the surface of the material. The drawback of such printing processes is that the resultant graphics are susceptible to damage and in most cases have to be rolled very carefully to prevent bruising or cracking of the ink.

IllumiGo backlit display graphics from Printdesigns are printed using a dye sublimation process. Rather than sitting on top of the surface of the material, the polyester-based fabric is dyed.

Unlike graphics from some suppliers, our dye sublimation prints can be folded for storage and transport without causing bruising and damage to the print.

illumigo 2M x 2M Lightbox Display

   Produced In House In The UK

Printdesigns handles all elements of IllumiGo graphics production from our own UK-based factory where we can maintain strict controls on the quality of our work and the deadlines we work to.

Our friendly team are always on hand to offer assistance and advice if you need it whether it's an artwork-related question or a technical question relating to the product itself.

In-house graphics production means that our prices on IllumiGo Freestanding Lightboxes are extremely competitive but should you find a lower price elsewhere, please get in touch and we will aim to beat it.


More Information
Print methodDye-sublimation
Dimensions (HxWxD)Packed Dimensions: 450mm (h) x 1140mm (w) x 180mm (d)
Assembled Dimensions: 2000mm (h) x 1000 (w) x 400mm (d)
Frame MaterialAluminium - powder coated white
Desktop or Floor StandingFloor Standing

View our product video

Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account