Seen it cheaper?
Challenge us to beat that price!
|
The Greenboarder banner stand is a roll up display stand made exclusively from cardboard. Unlike other displays of it's type, it is the first product to me made from a single source of material which enables it to be recycled conveniently in the normal paper and cardboard waste stream. |
|
100% Card = 100% RecyclableGreenboarder banner stands have comparable functionality and appearance when compared to typical roll up banner stands made from mixed metals and plastics that are notoriously difficult to recycle. By creating a product derived solely from cardboard, the Greenboarder banner eliminates the environmentally costly drawbacks associated with conventional banner displays because the unit is simple and easy to recycle at end of life. |
 |
 |
Natural Aesthetic Support BaseWith a stable base made from natural coloured cardboard, Greenboarder roll up displays are ideally suited for use within indoor locations such as exhibitions, conferences and events. They can also be used for general advertising within retail spaces and shops too. Unlike traditional flat packed cardboard POS displays that are often fragile and bulky, the Greenboarder banner is compact and convenient for transport. The display graphic is printed onto recyclable paper which is stored, rolled-up inside the base of the stand where it is protected it from accidental damage that can occur during transport. |
How Does The Greenboarder Banner Work?The bottom of the paper based printed graphic for the stand is attached to a cardboard spindle that is held captive within the base of the stand. A separate L-Shaped cardboard profile is attached to the top of the printed banner which is designed to fit over the top of the support pole. When pulling the printed graphic outwards from the base of the stand, the spindle rotates, allowing the print to unwind and hook-onto the top of the support pole that is inserted into the base. The design of the stand is not self-retracting but the casing of the Greenboarder banner can be opened up so you can manually roll up the graphic for storage and transport again if you need to. |
 |
 |
What's In The Box?All of the components needed to assemble this recyclable display are stored in one neat package. This includes the printed banner and also the support pole. The support pole for the banner is made from tubular cardboard sections that slide into one another. The pole inserts into a reinforced hole in the top of the banner so it is held securely. With careful, considerate use, the Greenboarder banner stand can be opened and closed again a number of times allowing it to be re-used at events. It is worth noting that any display made from cardboard will ultimately become worn and deteriorate with use. The Greenboarder eco roll up banner is intended for customer who require an eco-friendly, recyclable banner display for use at one off or occassional events. It is not intended for heavy repeat use. |
Stabilising Support FeetTo extend the footprint of the banner without increasing the packaged volume of the product, Greenboarder roll up banners utilise small twist-out stabilising feet at the rear. The feet open up and lock into place using simple cardboard tabs. This improves stability of the product which is beneficial when using the display in higher pedestrian traffic areas. |
 |
|
|
|
Be sure to check out the Greenboarder product video below! |
|
Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support
