Cyclone Outdoor Roller Banner Stand

Outdoor roller banner stand that has a weighted base used to fill with water and sand
  • Durable indoor or outdoor banner stand
  • Can be supplied single or double-sided
  • Base has wheels for transport
  • Base can be filled with water or sand for extra ballast
  • Twin sprung support poles
  • Carry bag included
As low as £238.80 £199.00
  • Tuesday 1st Februarystandard
  • Thursday 3rd Februaryeconomy

The cyclone outdoor banner stand is the perfect solution for any type of outdoor event which can be used safely on soft or hard ground. The water fillable base provides stability to the display making it one of the only free-standing roller banner stands on the market that can be used outdoors. The base also comes with wheels and a handle so that you can manoeuvre the stand easily once in use.



The Ideal Solution For Outdoor Events

Made out of tough moulded plastic, the base can take up to 26 litres of water or sand making it stable up to wind speeds of 13-18mph (4 on the Beaufort scale).

Twin upright poles also use heavy-duty coil springs at the bottom of the stand to provide additional flexibility when being used outdoors, this helps the graphics stay upright when used in open outdoor areas.

The base features a handle to one side of the unit and wheels to the other side of the display, this allows the stand to be moved without needing to empty the base.




Everything you need to make life easier at your event

The cyclone outdoor banner stand comes as a complete unit with the graphics already attached to each mechanism, simply insert the support poles into the base of the stand, pull the graphics out of the base and attach to the top of the pole where instructed on the hanging rail. 

The stand also comes supplied with a black nylon carry bag that has a shoulder strap to make it easier to transport, the bag also comes in handy when storing the stand away for future use preventing it from becoming damaged.

The base is made out of moulded plastic so it can be cleaned down easily using a damp cloth if it gets dirty in outdoor conditions.



Convenient to Transport

The Cyclone Banner stand once filled with water can weigh up to 26kg which can be quite tricky to manoeuvre, with this in mind the manufacturer has installed wheels to one side of the base and a carry handles to the other side making it easier to move around once filled to full capacity.

The filling point is located on the top of the base unit so you would need to fill the base before assembling the stand, this helps with keeping the base stable when attaching the graphics to the top rail.

If you require extra ballast then the base can be filled with sand which weighs almost double the pail of water per millilitre. Using sand is more of a permanent option than water and tends to be used for events that may last longer than a day or so.





Single or Double Sided Display Print Option

The graphics are printed onto a light Blockout PVC material using a digital UV print process. The ink cures to the material instantly using UV light so completely weatherproof, the PVC material is also weatherproof and one of the thickest in its range providing a strong and durable material when used outdoors.

The Cyclone banner stand has two roller mechanisms which allow the option for single or double-sided printing. You can supply different designs for the front and back and is one of the only stands on the market.




Key Features

  • Can be used indoors or outdoors
  • Supplied with single or double-sided prints
  • Durable heavy-duty base
  • Duel support poles using spring flexible coils
  • Based can be filled with water or sand
  • Stable up to wind speeds of 13-18mph
  • The base includes a handle and wheels for transport
  • Carry bag included

Advice and Support

If you require any further information on the Cyclone outdoor banner stand then please do not hesitate to get in touch. Our experienced members of staff are on call to help with any questions you may have.

Downloadable artwork templates are available on the product page to assist you with setting up your artwork files.

If you need any further assistance with the design then we do offer an in house graphic design team who can provide a quote based on your artwork requirements.


More Information
Weight (Approx)Single Sided - 19.63kg (empty)
Double Sided - 20.66kg (empty)
Base Capacity 25-28kg
Dimensions (HxWxD)2020mm x 800mm x 520mm
Freestanding or MountableFree Standing
Single Sided or Double SidedSingle Sided
Double Sided
PrintingNo Solvents (VOC's) used in printing process
Print methodUV Print process
Fire-resistanceDIN 4102-1 Class B1
MaterialBlockout PVC

View our product video

Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account