Curvorama Aero Kit
Arrangement of 5 tensioned banners that link together to make a versatile back wall
- Equivalent size to a pop up stand
- Can be used straight or curved
- Lightweight, durable components
- Supplied with rigid wheeled case
- Printed on Polyester Stoplight display film from your artwork
- Expandable for larger displays
About the product
The Curvorama Aero display kit is the perfect off the shelf solution if you require a great looking, lightweight yet expandable display system. Purchasing the Aero kit represents a cost saving when compared to purchasing the component parts, so it's great value for money. As it is free standing and the shape can be varied to suit the area you have in which to display within. It is possible to make the stand flat, concave or convex simply by adjusting the angle of the three flexible panels included in the kit.
The kit consists of the following components -
- 3 x 600mm wide flexible graphic panels
- 2 x 600mm wide straight graphic panels
- 5 x pairs of legs and feet for supporting the graphics
- 1 x Rigid wheeled carry case
When straight the Aero kit has an assembled size of 3 metres wide and 2.2 metres tall - perfect for filling smaller exhibition booth spaces. Should you wish to fill a larger area then no problem because we can supply additional straight or curved panels along with support poles and feet. Simply call or email with your floor plan and we can calculate the best combination of stands to meet your requirements.
Although the Curvorama Aero kit is a free standing display product, we can provide optional wall mounting clips for the printed panels at an additional cost. Wall mounting clips enable the graphic panels to be hooked over most exhibition shell scheme walls rather than using the graphics in conjunction with the supplied poles and feet. This is a benefit should you wish to maximise the use of the floor space on your exhibition stand as panels are essentially flush to the wall of your stand.
Assembly Video
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Glass Fibre - Not Recyclable
General
Colour:
- Black
Dimensions (HxWxD):
- 2250mm x 3000mm x 500mm
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- 16Kg
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
Downloads
-
Curvorama Aero Kit Template (361 Kb)
-
Curvorama Aero Kit Data Sheet (394 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.