About the product
The Link2 Roller Banner Stand features a revolutionary design that unlike any other roller banner stand on the market allows multiple stands to be connected together to create larger, mural style display walls.
Traditional linking banner stands involve storing and transporting printed graphic panels separately. With the Link2 banner stand, the prints are stored within the banner stand base when being transported. This means that the graphics are protected from damage.
As well as the ability to link together to create larger walls, Link2 banner stands also offer several other innovative features including:
- Easy change graphics - artwork can be updated with no tools in 1-2 minutes.
- Choice of two height options: 2000mm or 2175mm.
- Optional flexible hinge panels can be inserted between Link2 Banners to create bends and corners.
- Levelling system allows banners to remain connected together even on un-even floors.
- The base of each Link2 banner stand features fold-out stabilising feet that can be deployed when required.
Each Link2 banner stand comes complete with a full colour printed graphic on high quality stoplight polyester film. Graphics are laminated with a crystal, scratch resistant finish as standard.
Why not view our Link2 banner stand video for a full overview of this product.
Assembly Video
Related products
Specification
Environmental
Printing:
- Digital aqueous ink-Jet - full colour, photo quality
General
Dimensions (HxWxD):
- Overall Dimensions: 860mm (w) x 160mm (d) feet open x 2140mm / 2315mm (h) Base Dimensions: 860mm (w) x 135mm (d) feet closed / 160mm (d) feet open x 140mm (h)
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- 6.1kg
Banner Width Range
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
:
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
- Regular - 600mm - 1200mm
- Aluminium Framework
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Aqueous Ink Jet
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- High
Waterproof
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
:
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
- Not recommended for outdoor use
Downloads
-
Link2 Banner Stand 850 x 2000mm Template (236 Kb)
-
Link2 Banner Stand 850 x 2175mm Template (238 Kb)
-
Link2 Banner Stand Data Sheet (325 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.