SEG Freestanding Frames
Portable display banner with tensioned fabric graphics
- Stunning tensioned fabric graphics
- Can be used as a single or double sided display
- Choice of width options
- Environmentally-friendly alternative to throw-away banners
- Packs into a small carry bag for transport
About the product
Our portable TFS (tensioned fabric system) provides a professional and modern alternative to a typical banner display system. The frame is made from a simple aluminium profile with a slim, 40mm depth and is capable of accepting graphics on one or both sides.
The SEG Freestanding frame can be assembled without the need for any tools and the frame is supplied in small, manageable sections that simply lock together with thumb screws.
Stability is achieved with two support feet that push fit onto the bottom section of the frame and secure in place with thumb screws. For ease of transport, the display can be packed-down into a compact nylon carry bag so it can be transported to and from events.
The process of assembling the SEG Freestanding frame will take one person around 5 minutes. It is a more involved process when compared to the 30-second assembly that is required for a typical roller banner stand but the visual result is far superior with the tensioned fabric print having a completely smooth, flat appearance.
From an environmental standpoint, a tensioned frame provides many benefits. The frame can be re-used time and time again whereas a typical roller banner mechanism would be disgarded when the graphics became outdated.
Prints for the SEG Freestanding Frame are produced using a dye-sublimation printing process using a recycleable polyester display fabric sewn with a silicone bean around the perimeter.
You can buy the SEG Freestanding Frame with either one or two prints depending on whether you want to have a single sided or double sided display, we can also provide extra prints separately.
Specification
Environmental
Printing:
- Dye sublimation digital printing
Recyclable:
- Aluminium frame can be recycled
- Print can be recycled with other textiles
General
Dimensions (HxWxD):
- Assembled: 200cm tall x 85/100/150cm wide
- Depth of support feet: 40cm
- Packed in bag: 110cm x 15cm x 15cm
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- 6kg
- printed panels: 0.5kg each approx
Banner Width Range
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
:
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
- Regular - 600mm - 1200mm
- Wide - 1200mm or greater
- Floor Standing
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Dye-sublimation
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Lightweight textile has high scratch resistance
Downloads
-
SEG Freestanding Frame Artwork Templates (2,161 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.