About the product
In terms of tensioned banner stands, the Uno banner is one of the most popular. It's available with a fabric panel in a choice of colours. This allows you to fasten your own printed material to the stand using hook velcro.
The Uno banner stand utilises a telescopic pole which supports the graphic from top to bottom. A heavyweight metal foot secures to the base of the stand and provides stability.
Uno Fabric Banner Stands come complete with a carry bag. The graphic rolls-up and stores along with the support pole and foot for convenient transport. The tube bag has diameter approximately 150mm and is either 850mm long (for 800mm wide stand) or 1050mm long (for 1000mm wide stand).
This fabric banner is available in a choice of either 800mm wide or 1000mm wide and measures 2200mm tall. The fabric panel can be supplied in 6 colour variations. However please note, the colours displayed on screen are approximate and may differ from the final product due to monitor calibration.
Specification
General
Colour:
- Black
Dimensions (HxWxD):
- 2200mm x 1000mm x 300mm
- 2200mm x 800mm x 300mm
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- 1000mm x 3.44Kg
- 800mm - 3.1Kg
Banner Width Range
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
:
Width of banners is divided into 3 groups:
Narrow: 600mm wide or less
Regular: 600mm - 1200mm
Wide: 1200mm or greater
- Regular - 600mm - 1200mm
- Floor Standing
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Downloads
-
Uno Banner Stand Data Sheet (360 Kb)
-
Uno Banner Stand Instructions (182 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.