Embrace SEG Lightbox Pop Up Stand
Stunning portable illuminated backwall display stand
- Stunning illuminated/backlit graphics
- Graphics push fit to frame using a silicone beading
- Frames can be joined together to fill larger areas
- No visible sew lines in face of graphic
- Lightweight and compact for transport
About the product
The Embrace SEG Lightbox Display provides the impact of a tensioned fabic lightbox in a format that is highly portable and easy to construct in around 10 minutes with no tools required.
Conventional tensioned lightbox displays are made from sections of aluminium profile that are time consuming and bulky to transport. The Embrace display stand solution uses a collapsible 'pop up' frame that can be expanded and collapsed in under a minute.
Once the frame is expanded, a series of aluminium channel bars are clipped on around the outside edge. The channel bars have a groove that the backlit fabric print push-fits into. Once the print is attached, it sits completely flat and smooth with no visible panel joins or seams.
The illumination of the print is achieved by using curtains of flexible LED lights that are suspended internally on the frame. Each vertical section of the frame holds a curtain of 108 separate LED's with a total output of 90 Watts. The lighting curtains are supplied in carry bags for transportation.
We offer the SEG lightbox fabric pop up display stand in a choice of 4 width options as follows:-
- 3x1: 790mm wide (supplied with 1 LED curtain light set)
- 3x2: 1523mm wide (supplied with 2 LED curtain light sets)
- 3x3: 2239mm wide (supplied with 3 LED curtain light sets)
- 3x4: 2972mm wide (supplied with 4 LED curtain light sets)
- all frames have assembled height of 2255mm and depth of 338mm (or 735mm deep including support feet)
If you want to create larger display walls, it is possible to connect several SEG Embrace fabric pop up display frames together either side by side or at 90 degree angles to one another using optional linking brackets. When connecting multiple frames together, backlit graphics can be printed in one large piece so as to cover all frames with no seams or gaps in-between them.
If you have a particular display area to fill, please contact us with your floor dimensions and we will be happy to calculate the 'best fit' of SEG Frames to fit your space.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Silver
Dimensions (HxWxD):
- 3x1 S - 2255 x 790 x 338mm
- 3x2 S - 2255 x 1523 x 338mm
- 3x3 S - 2255 x 2239 x 338mm
- 3x4 S - 2255 x 2972 x 338mm
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Dye-sublimation
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- High
Waterproof
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
:
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
- Not recommended for outdoor use
Width
Overall width of the graphic (includes non-viewable area of print where applicable). Please refer to downloadable artwork template.
:
Overall width of the graphic (includes non-viewable area of print where applicable). Please refer to downloadable artwork template.
- under 1000mm
- 1000mm - 3000mm
- 3000mm +
Downloads
-
Embrace SEG Fabric Display Instructions (203 Kb)
-
Embrace SEG artwork templates (4,214 Kb)
-
Embrace SEG data sheets (1,114 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.