Formulate Straight Display Stand
Compact and lightweight straight display back wall with stretch fabric graphic
- Formulate Straight Display frame push fits together
- Straight shape, one piece graphic panel
- Supplied with carry bag for transport
- No visible seams or joins in the face of the graphic
- Lightweight and easy to transport
About the product
The Formulate Straight fabric display stand is a great looking back wall that utilises a one-piece, stretch fabric graphic skin to cover a tubular aluminium frame. Formulate Straight displays are now available in a wider choice of 5 width options ranging from 2.4M up to a huge 6M.
Being produced from one piece of fabric, the Formulate Straight Display Stand print has no visible seams or joins in the face of the print. This makes the finished product a more aesthetically-pleasing solution when compared to a older magnetic pop up stands that use multiple printed panels that have to be aligned side by side on the frame with seams in-between.
At approximately 13KG (based on the 2.4M width variant), Formulate Straight fabric displays are around 1/3rd of the weight of an equivalent magnetic pop up. The frame and graphic panel packs-inside a single holdall fabric carry bag that is small enough to be carried conveniently to and from exhibitions and events by hand.
Assembling the Formulate Straight Display Stand is very straight forward as is the case with other displays in the Formulate range. The frame sections are numbered and held together with elasticated bungee cord. Simply push-fit together the numbered sections to make the frame and then pull the graphic over like a sock and close the zipper to hold it in place.
Graphics for the Formulate range of fabric displays are printed and sewn in-house at our own factory using state of the art digital printing equipment. We use a highly elastic fabric that allows the graphic to pull over the frame under tension removing any creases that could have been caused whilst the print is stored in the bag.
Printed graphic panels for our range of fabric display stands are highly durable and can be machine washed should the print become accidentally marked or dirty. We recommend washing at 30 degrees and air drying only.
Graphics for the Formulate Straight display are available printed single sided (white on reverse) or with full colour printing on both sides as a no-cost option.
Assembled sizes for the Formulate Straight Display are as follows:
- 2.4m - 2280mm(w) x 2380mm(h)
- 3m - 2950mm(w) x 2380mm(h)
- 4m - 3950mm(w) x 2380mm(h)
- 5m - 4950mm(w) x 2380mm(h)
- 6m - 5950mm(w) x 2380mm(h)
Assembly Video
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Silver
Dimensions (HxWxD):
- 2.4M Stand - 2350mm wide x 2380mm tall
- 3M Stand - 2950mm wide x 2380mm
- 4M Stand - 3950mm wide x 2380mm tall
- 5M Stand - 4950mm wide x 2380mm tall
- 6M Stand - 5950mm wide x 2380mm tall
- See downloadable artwork templates for artwork setup information
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Dye-sublimation
Width
Overall width of the graphic (includes non-viewable area of print where applicable). Please refer to downloadable artwork template.
:
Overall width of the graphic (includes non-viewable area of print where applicable). Please refer to downloadable artwork template.
- 1000mm - 3000mm
Downloads
-
Formulate Straight Data Sheets (978 Kb)
-
Formulate Straight Artwork Templates (4,269 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.