Linear Straight Counter
Stylish, practical & robust
- Anodised aluminium construction
- Flat packed, easy to transport and quick to assemble
- 50mm modular post system
- Linear twist and lock, no tools required
- Carry bags are available at an extra cost
- Top and base available in a choice of Birch, Black, Silver and White finishes
About the product
The Linear Straight Counter is a strong, durable counter that is ideal for exhibition and display purposes. The counter is available in two sizes at either 1M or 2M wide.
The Linear Straight Counter is made from a table top and base that are separated by 50mm diameter upright aluminium posts. The posts simply twist and lock into the top and bottom of of the counter by hand so no tools are required for assembly. The solid vertical support posts of this counter are substantial so this counter is much more load-bearing when compared to a typical 'pop up' design.
The Linear Straight Counter comes complete with printed panels on the front and sides which are produced using 5mm thick Foamex PVC board. The graphics are bubble wrapped and supplied packed separately to the counter itself.
The rear of the counter is open as standard but we can supply optional panels that can be attached to the rear of the counter with velcro. This is useful if you want to store any products in the back of the counter out of sight.
Assembled Sizes for Linear Straight Counter:
- 1010 high x 1000 wide x 500mm deep (1M wide version)
- 1010 high x 2000 wide x 500mm deep (2M wide version)
For those customers with a requirement for a wider table, it is worth noting that multiple Linear Straight Counters can be stood together on any even floor surface in order to occupy a larger space.
The Linear Straight Counter is supplied boxed for delivery. Optional nylon carry bags are available. The 1M wide counter will fit into a single bag (part number AB112A) whereas the 2M wide counter needs to be packed into 2 separate bags (part number AB112A and AB222)
As well as supplying Linear Straight Counters in 1M and 2M width options, we can manufacture to order custom sizes. Please call or email to discuss prices and availability of custom sized counters..
Accessories
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
General
Dimensions (HxWxD):
- 1010 x 1000 x 500mm
- 1010 x 2000 x 500mm
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- 20kg
Graphic
Continuous Mural Graphics
Mural graphics can run over the hole perimeter of the stand without physical gaps in-between. Dependent on the system, mural graphics can be printed onto separate panels that tile next to one another or as one piece fabric prints.
:
Mural graphics can run over the hole perimeter of the stand without physical gaps in-between. Dependent on the system, mural graphics can be printed onto separate panels that tile next to one another or as one piece fabric prints.
- No (panels do not join together)
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Downloads
-
Linear Straight Counter Artwork Templates (1,875 Kb)
-
Linear Straight Counter 1000mm Data Sheet (341 Kb)
-
Linear Straight Counter 2000mm Data Sheet (342 Kb)
-
Linear Straight Counter Assembly Instructions (305 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.