Standex Showcase Range 4
Ideal display for showcasing products
- High quaility, robust display
- Easy change graphics
- Quick and simple to assemble
- Selection of optional accessories
- Choice of heights
About the product
The Range 4 Counter units are ideal for displaying your products safely and securely due to a clear acrylic panel which surrounds the counter. These are 3 types of counter from this range which all have their own benefits but ultimately they are all designed to draw attention to your product.
PC-12-H - Features a clear display area on top of the display measuring at 186mm in depth.
PC-12-B - Features a deeper two leveled clear case with a total depth of 440mm.
PC-12-C - Deep, single levelled clear case with a depth of 475mm
Just like the other Standex Range's assembly is straight forward. Using the satin anodised aluminium frame work, simply open the hinged sides and insert the panels into the channel of the framework. Printed graphics are an additional extra, but these counters make it easy to change the message frequently. Panels simply slide into the frame work and locked in place. Change your message at shows, seasonally or for new product launches.
These units are supplied with shelves, base shelf and locakble sliding door.
Assembly Video
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- White
Dimensions (HxWxD):
- PC-12-B - 1050 x 1070 x 515mm
- PC-12-C - 1050 x 1070 x 515mm
- PC-12-H - 1050 x 1070 x 515mm
Fabric Panels or Custom Printed Panels
Panel kits can be supplied with loop-nylon fabric infill panels or custom-printed graphics
:
Panel kits can be supplied with loop-nylon fabric infill panels or custom-printed graphics
- Custom Printed Graphic Panels
Weight
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
:
All weights are approximate values. Please refer to the product data sheet for accurate weight information which may vary dependent on product options
- PC-12-B - 40Kg
- PC-12-C - 38Kg
- PC-12-H - 32Kg
- Aluminium Framework
Ideal for
Our range of portable display counters are divided into group sets depending on their suggested use
:
Our range of portable display counters are divided into group sets depending on their suggested use
- Exhibitions & trade shows
- Promotions & product demonstrations
- Floor Standing
Graphic
Continuous Mural Graphics
Mural graphics can run over the hole perimeter of the stand without physical gaps in-between. Dependent on the system, mural graphics can be printed onto separate panels that tile next to one another or as one piece fabric prints.
:
Mural graphics can run over the hole perimeter of the stand without physical gaps in-between. Dependent on the system, mural graphics can be printed onto separate panels that tile next to one another or as one piece fabric prints.
- No (panels do not join together)
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Waterproof
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
:
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
- Not recommended for outdoor use
Downloads
-
PC-12-H - Specification drawing (176 Kb)
-
PC-12-B - Specification drawings (175 Kb)
-
PC-12-C - Specification drawings (129 Kb)
-
Standex Counter Range 4 Brochure (258 Kb)
-
Standex Range 4 Artwork Templates (2,575 Kb)
Printed proof
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.
Best Price Promise
Found the same product advertised cheaper elsewhere? Let us know and we'll aim to beat that price. Terms & conditions apply. See details.
Free Delivery Over £60
All orders over £60, placed online and paid for via credit/debit card, qualify for a FREE 3 working day courier delivery to UK Mainland. See details.