Cross Braced Pop Up Stand
Highest quality self-locking frame with additional rigidity. Choice of width. Curved shape only
- 10 year hardware guarantee
- 2.4m assembled height
- Cross braced for extra stiffness
- Set up in minutes with no tool required
- A selection of transit case upgrades are available
- Optional rear panels can be added for an additional cost
About the product
Our Cross Braced Pop Up Display Stand is the best value cross braced display on the market. The system uses tough anodised aluminium tubing in an extremely robust cross braced configuration.
Benefits of the cross braced stand over regular stands include:-
A greater assembled height than most magnetic, non cross braced pop up systems which is beneficial at shows where added height draws more attention. The framework is more rigid, meaning panels fit well even when the stand is assembled on an uneven floor. Finally the end caps of the cross braced stand are narrower thus the depth of the frame is reduced, ensuring a tighter fit against an exhibition stand back wall.
As with our Express pop up stand, the cross braced pop up stand also features the magnetic hanging kits rather than the regular 'node and hook' used on cheaper displays.
Pop up stands can be used double sided please call for additional costs.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Blue anodised aluminium
Dimensions (HxWxD):
- Dependent on width option - see product data sheet
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Inkjet
Downloads
-
Cross Braced Instructions (643 Kb)
-
Luxury case wrap template (292 Kb)
-
3x1 Cross Braced Data Sheet (223 Kb)
-
3x2 Cross Braced Data Sheet (226 Kb)
-
3x3 Cross Braced Data Sheet (227 Kb)
-
3x4 Cross Braced Data Sheet (231 Kb)
-
3x5 Cross Braced Data Sheet (231 Kb)