Serpentine Pop Up Stand
Wave shaped arrangement of pop up stands made with two 3x3 cross braced frames
- Unique serpentine or wave shape
- Ideal for large stand spaces
- Magnetic fixing bars
- Choice of two conversion kits
- Optional lighting for greater impact
About the product
Serpentine or wave pop up display stand walls are a popular choice for creating large exhibition stand backdrops. The contoured shape of a serpentine pop up display wall gives a softer more flowing appearance than a standard flat back wall display.
This configuration has been created by using 3x3 Express fully magnetic curved pop up displays with one frame rotated at 180 degrees to the adjacent one. The two pop up display frames are connected by means of a central hinge panel, sometimes referred to as a 'ghost' panel. The overall length of this configuration can be adjusted slightly by varying the angle of the flexible hinge panel that connects the two pop up frames but as a guide the overall width is approximately 5700mm.
The Serpentine Pop Up arrangement can be illuminated using two pairs of halogen floodlights for greater impact. It is also possible to add optional parts such as internal or external pop up shelving or an integrated monitor screen.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Inkjet