Twist Flexilink Single Panel
Flexible panel to add sections/ curves to the Twist Stands.
- Sleek, innovative design.
- Adds unique flare to your stand design.
- Extra height (2250mm) Available.
- Easy to add additional sections at a later stage.
About the product
The Flexible panel for Twist stands is used to connect straight Twist panels together whilst also allowing for curves to be made in the display, this can be used for going round corners, or just to add some unique flare to your stand design.
The Twist Flexible panel is only available in 550mm wide, but can be produced at 2000mm or 2250mm Height.
If you have a particular display area to fill, why not give us a call. Twist Stands can fill almost any display area and we offer a free CAD design service and we can work out the best way of using Twist Banners to fill your available space.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Grey
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Inkjet
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Downloads
-
Twist Banner Stand Flexilink Panel Templates (237 Kb)