Twist Original Banner Stand
Traditional Magnetic Pop Up Display
- Sleek innovative design
- Single or Double Sided Print Options
- Extra height (2250mm) Available
- Easy assembly with no tools required
- Large range of accessories and lighting available
- Easy to add additional sections at a later stage.
About the product
The Twist Original Twist Display stand is available in 700, 800, 900 or 1000mm wide and can be used single or double sided. There are also two height options, A standard height of 2000mm or an extra height pole section can be purchased to make the display 2250mm Tall.
This particular display stand can be used on it's own or as part of the Twist Flexilink Display Kit.
This innovative banner stand links together to create much larger back-wall displays. Twist Banners are incredibly versatile and can be used either single sided or double sided.
The Twist Display works be employing an Aluminium base with a sectional upright support pole. The graphic panel hangs between the top of the pole and the base of the display using a tensioned hanging rod at the top in order to keep the print taught.
The patented design of the Twist Banner allows the printed panel to pivot slightly, thus compensating for slight unevenness of the floor it is sitting on and this in turn allows multiple stands to be joined together without the problems associated with other linking banner stands.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Grey
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Inkjet
Downloads
-
Original Twist Banner Stand Assembly Instructions (409 Kb)
-
Original Twist Banner Stand Artwork Template (263 Kb)