Twist Curve Display System
Lightweight Twist Curve Display Stand
- Sleek innovative design
- Lightweight (12KG) Easy to Transport exhibition stand
- Easy assembly with no tools required
- Lighting accessories are available
- Easy to add additional sections at a later stage.
About the product
The Twist Curve Display System is supplied as a three panel kit. There are two straight banners linked together with one central, flexible hinge panel. The curvature of the central panel can be adjusted so that the finished shape of the stand can vary. This makes the Twist Curve 3 Panel display highly adaptable.
In addition to using the stand as one complete kit, it is also possible to break apart the two straight stands and use them as individual single sided or even double sided banners (by hanging two prints back to back on the same frame).
Straight panels are 850mm x 2060mm and the curved central panel is 425mm x 2060mm
The complete Curve including graphics weighs only 15kg, making the Curve one of the lightest 3-panel exhibition kits available.
We offer two types of carry accessory. We strongly recommend purchasing the Hard Case which is specific to this product. The hard case can fit all graphic panels, feet and poles whilst also protecting the display.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
Recyclable:
- Aluminium frame can be recycled
General
Colour:
- Grey
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Inkjet
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Downloads
-
Twist Curve Set Up Instructions (344 Kb)
-
Twist Curve Example Stand Arrangements (2,847 Kb)
-
Artwork Setup Template for Twist Curve 3 Panel Kit (54 Kb)