Polar Outdoor Banner Stand


Quick Summary

See More

The Polar Outdoor Banner Stand is a versatile outdoor banner display that can be used single or double sided. The Polar Outdoor Banner Stand has a hollow base that can be weighted with sand or water.


Choice of Print Material:
Optional Carry Bag:
Optional Weighted Base Ring:
Printing Required:
£155.00 tax excluded
£186.00 (tax inclusive)

More Info

The Polar Outdoor Banner Stand is very versatile and thanks to to the hollow base that can be weighted using sand or water it is suitable for indoor and outdoor use in winds of up to 12MPH.

The Polar Outdoor Banner has adjustable width and height, from 650mm wide up to 800mm wide and between 1200mm and 2000mm tall.

With the base empty the Polar Banner Stand weight approximately 6.6KG and when filled with 18 Litres of water, 19KG. For higher wind conditions, an optional base ring is available which holds an additional 10 Litres of water, the addition of this base ring adds an extra 7KG of weight to the unit.

Graphics for the Polar Outdoor Banner Stand are printed onto Mesh PVC material. This porous substrate allows wind to diffuse through the graphic and thus gives more stability in windy conditions than a regular PVC print would. Should you require a standard PVC graphic then this is possible, please select your choice from the drop down menu.

The Polar Outdoor Banner Stand can be supplied with optional carry bags for £20 plus vat. The optional water-weighted base ring also costs £20 plus vat.

The Polar Outdoor Banner Stand ships with one graphic (for single sided use). Should your required a double sided Polar Banner Stand, please select this option when ordering. You can have the same graphic on both sides or if you supply two pieces of artwork, you can have a different image on both sides. Please note that both images need to be the same size.


  • Single or double-sided
  • Ideally suited for use with eyeleted PVC or mesh substrates
  • Suitable for outdoor and indoor use
  • Adjustable aluminium telescopic pole
  • Moulded plastic base - fill with water or sand for extra stability
  • Quick and easy to assemble without the need for tools
  • Graphic height ranges from 1200 x 2000mm
  • Graphic width ranges from 650 x 800mm
  • Optional weighted base ring for high gust areas (water filled)
  • Optional carry bags available

Artwork Requirements - design templates are also available in our download section above

Size:Between 650mm and 800mm width and Between 1200mm and 2000mm height

Resolution:We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.

Colour Mode:Supply artwork in CMYK mode only

Important Info:Eyelets are positioned at the corners of the banner approximately 3cm in from the edge. We advise not placing any critical viewable information in the corner areas of the page so as to avoid the eyelets obscuring the information.

Files types supported: Please save files as JPG, Tiff or PDF


User Reviews

Add your review

No customer comments for the moment.

Only registered users can post a new comment.