Shimmer Flag

Available

Quick Summary

See More
  • Cost-Effective Flag Banner
  • Base can be weighted for stability outdoors
  • Comes with bespoke printed flag graphic
  • Overall Height up to 2560mm

Options

Optional Printing:
Turnaround:
X
£158.00 tax excluded
£189.60 (tax inclusive)

Quantity Discounts

6 quantities
-£11.00

More Info

The Shimmer flag banner is the perfect low cost solution for any outdoor event.

 

The flag can be supplied with a single sided print (image shows through to the reverse of the flag mirrow image) or a double sided flag (two flags are sewn back to back with a liner in the middle to prevent show through).

 

Product Features

 

  • Designed for lightweight flag material.
  • Components mainly formed from lightweight plastics, easy assembly.
  • Support pole and base are black colour
  • Base of the unit can be weighted with up to 8 litres of water/sand
  • Assembled Height 2560mm
  • Weight 2.6kg. With water filled base 9.6kg.
  • Flag visible graphic area: 550mm (w) x 1800mm (h)
  • Artwork size 710mm (w) x 1860mm (h) - includes pockets



 

Shimmer flags consist of a lightweight telescopic pole, a metal horozontal top pole section, weightable plastic base and of course a bespoke full colour printed graphic panel.

 

The base on the Shimmer flag can be filled up with either water or better still sand to provide ballast if the unit is being used outside. To weight the base, simply open-up the plug on the unit, fill with sand or water and replace the plug.

 

The graphic for the Shimmer Flag is printed onto 110gsm textile flag material and a pole pocket is sewn along the left hand edge and top. The pole of the shimmer flag simply slides into the pocket and the horizontal top pole section fits into place. Assembly is quick and , taking no more than around 3 minutes!

 

Due to the low-cost nature of the product, the Shimmer flag is not supplied without specific carry bags but the components are supplied boxed. For those customers who require a dedicated bag, we can manufacture to order on request or the components can be stored in a large holdall.

 

Graphic printing for the Shimmer Flag is single sided but the reverse side of the print shows through as mirror image to the front with around 90% opacity as is the case with most flags.

 

Should you require help or assistance with the design of artwork for this product, please contact us so we can discuss your requirements and estimate the time for the project. If you are creating your own artwork, please just download the Shimmer Flag artwork setup instructions from the link below which provide instructions as to the correct dimensions etc.

 

Turnaround on Shimmer Flags is 7-10 working days.

Attachments

Accessories

User Reviews

Add your review

No customer comments for the moment.

Only registered users can post a new comment.