Polar Banner Stand
The Polar is an attractive Banner Stand, suitable for indoor or outdoor use
- Single or double options
- Suitable for outdoor and indoor use
- Adjustable telescopic pole
- Base can be weighted down with water or sand
- Optional carry bag
- Quick and easy to assemble. No tools required.
About the product
The Polar banner stand is very versatile and thanks to the hollow base that can be weighted using sand or water it is suitable for indoor and outdoor use in winds of up to 12mph. In addition, the banner has adjustable width and height, from 650mm - 800mm wide and 1200mm - 2000mm tall.
With the base empty the Polar banner stand weighs approximately 7Kg and when filled 19Kg. For higher wind conditions an optional base ring is available which adds around 7Kg in weight.
Graphics for the banner are printed onto Mesh PVC. This porous substrate allows wind to diffuse through the graphic and thus gives more stability in windy conditions. It is however possible to print onto PVC but it may become unstable in stronger wind conditions.
The polar banner stand ships with one graphic Should you require a double sided Polar banner stand, please select this option when ordering. You can have the same graphic on both sides or if you supply two pieces of artwork you can have a different image on both sides. Please note both images need to be the same size.
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
General
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing