The Mistral rotating flag bracket is mounted on an extended arm which allows the graphic to rotate in the wind.
The Rotating Mistral Flag bracket is designed to fit any lamp post with a diameter from 30-300mm which makes it suitable for use in almost any outdoor location where a suitable vertical post is available.
Brackets are made from weatherproof cast aluminium whilst the horizontal arms are made from tough GRP (fibreglass).
Our rotating Mistral lamp post banner is available to purchase as hardware only (without printing) or with a choice of printed graphics using fabric flag material or blockout PVC material. Standard prints are 800mm wide x 2000mm tall but it is possible to have taller or shorter graphics by altering the distance between the brackets on the post.
Blockout PVC graphics can be viewed from both directions and are suitable for short term use in wind speeds of up to beaufort scale 5. Fabric graphics allow air to diffuse through the material and are therefore suitable for longer term use in wind speeds up to beaufort scale 7.
Please note that fabric flag graphics will allow the image to show through from the front to the reverse of the material (so the image on one side of the flag will display mirror image). PVC graphics can be viewed the correct way around from both directions.
Rotating Mistral Lamp Post Flag Instructions (2,527 Kb)
Rotating Mistral Lamp Post Flag Artwork Template (298 Kb)
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.