Zoom Plus Event Arch
Highly portable and eyecatching outdoor event arch.
- 3M tall x 4M wide approx assembled side
- Poles, printing and carry bag included
- Ideal for showrooms, races and all outdoor events
- Designed to withstand wind speeds up to 32KM/H
- Water fillable plastic bases available as an option
Get noticed with our lightweight, arch shaped event flag.
It is the ideal solution for branding entrances at events, sporting occassions or for use at registration areas and finish lines.
The Zoom Plus Event Arch frame is made from a lightweight 6-part glass fibre pole. The pole sections are connected together with elasticated cord so they can be stored together neatly.
The ends of the poles are finished with chrome end caps and plastic hooks. After the print is slid-over the pole, it attaches onto the ends of the pole via the hooks.
All components including with the printed graphic can be packed away into a small nylon carry bag that is included with this product.
The printing of the graphic is produced using 115gsm knitted flag polyester and the image is printed on one side with the graphic showing through to the reverse mirror image.
The Zoom Plus Event Arch flag can be supplied with 4 x optional plastic hollow bases that are capable of holding up to 26 Litres of sand or water each. We recommend using two bases at each end of the event arch in order to securely anchor the product to the ground.
If you do not require the optional water bases, the poles may be secured to the ground using another method. For example, by securing the poles to a pre existing structure or by sitting the poles on top of ground spikes.
- Dye sublimation digital printing
- assembled approx dimensions: 3000mm(h) x 4000mm(w)
Zoom Plus Event Arch Instructions (893 Kb)
Zoom Plus Event Arch Artwork Template (640 Kb)
If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article.