3M x 3M Gazebo - Full Wall Panels
Full height printed wall panels for use with the 3M x 3M Gazebo tent
- Suited for the 3M x 3M Gazebo
- Multi print option
- Lightweight
- Easy to attach
- Bespoke design
About the product
Full size wall panels run from the top of the canopy to ground level on our Gazebo tent. Graphics are printed on one wide and are white on the reverse.
The top of the fabric is finished with velcro that attached to the lower valence on the printed canopy. The sides of the wall are connected using bungee cords which simply fold into themselves to create a secure fitting.
You can fasten a full height graphic panel on some or all of the Gazebo walls. Simply order how many graphics depending on your requirements.
The 230gsm polyester tent material we print on is very durable and water resistant. Prints are output digitally in full colour using a dye sublimation printing process. You can use as much or as little colour as you like so you can be as creative as you want with your artwork!
Assembly Video
Specification
Environmental
Printing:
- No Solvents (VOC's) used in printing process
General
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- Dye-sublimation
Scratch-resistance
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
:
• Medium scratch resistance for non-laminated graphic
• High scratch resistance for graphics with crystal lamination
- Medium
- High
Waterproof
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
:
Where specified. The product is designed for outdoor use and prolonged exposure to moisture.
- Yes
Downloads
-
Gazebo Graphic Spec (3,294 Kb)
-
Gazebo Spec Sheet (181 Kb)
-
Material specifications (108 Kb)