Horizon Outdoor Banner Stand
Large Scale Outdoor Portable Advertising Banner
- Printdesigns can print large format
- Outdoor or indoor banner system
- Single or double sided
- Frame is extendable to the max of 2.4M tall and 2.5M wide
- Easy assemble no tools required
- Optional carry bag
- Can withstand wind speeds up to 10-12mph (Beaufort scale 3)
About the product
The Horizon is the largest banner stand in our range. Up to an enormous 2.4M tall x 2.5M wide, the banner creates a huge display area that can be either single or double sided whilst being stable enough to use outdoors. The banner stand utilises a simple aluminium framework and weighable plastic base to create a framework that is tough, easy to assemble and stable enough to be used outdoors in light to moderate wind conditions.
The graphics for the horizon banner are printed onto hard wearing PVC and the edges are welded to create double strength seams through which eyelets are placed at regular intervals. The graphics are then supplied in a suitable tube for transport and the stand is supplied boxed for assembly. We offer optional carry bags for the Horizon also. There are two bags required for this banner, a pole bag and a base bag with the combined cost of £115 plus vat for both bags.
Assembly of the banner is simple and full assembly instructions are available from the download area.
Specification
Environmental
Recyclable:
- Aluminium frame can be recycled
General
Graphic
Easy-change graphic
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
:
The process of changing graphics on banner stands is easier on some models than others.
Easy-change - The print can be removed and replaced in a minute or so. You can purchase additional prints and swap between them quickly and easily.
Non Easy-change - Replacing the print is more difficult and the old graphic can be damaged during the removal process. The process could take more than 5 minutes and you may need some basic tools.
When ordering replacement prints for non easy-change banner stands, we recommend you send the old display to us so we can remove and re-fit the new print to your stand for you (there is no additional charge for this service).
Should you wish to replace the graphic on a non easy-change display yourself then we can supply the print along with fitting instructions.
- Yes
Print method
Available printing methods for this product. Actual printing method depends on selected graphic material.
:
Available printing methods for this product. Actual printing method depends on selected graphic material.
- UV Printing
Downloads
-
Horizon Banner Stand - Data Sheet (155 Kb)
-
Horizon Banner Stand - Artwork Template (528 Kb)
-
Beaufort scale data sheet (13 Kb)