Pop Up Towers utlise the same basic frame construction as a regular pop up display system although the hubs of the framework are adapted to the different geometry.
As with all of our pop up stands, the pop up tower is collapsible and assembly of the system is possible in a matter of minutes with no tools required.
The first step in the assembly process of the pop up tower involves expanding the framework outwards until it locks into it's upright position using magnetically locking bars. While the magnetic locking arms hold the frame upright, a series of magnetic channel bars are simply added to the frame by clicking them onto the structure one by one.
With the frame upright and the magnetic channel bars for the pop up tower in place, you only need to hang the printed panels onto the frame itself. The graphics for our pop up towers are printed onto a durable light blocking polyester which is laminated with a scratch resistant finish film.
There are three graphic panels supplied with each pop up tower and they fit edge-to-edge on the frame to give the appearance of a continuous cylinder when assembled.
For the Ultimate attention grabber, it is possible to illuminate this tower using internal fluorescent lighting. A total of 6 strip lights are used on a 2-Quad tall display, 9 lights on a 3-Quad tall display, 12 lights on a 4-Quad display or 15 lights on a 5-Quad tall display. You can order PS1200 fluorecent lights from our pop up stand lighting section or from the accessories tab
We can supply pop up towers in 4 different height options. All height options have the same 640mm diameter (approx)
- 2 Quad Height: 1485mm height approx
- 3 Quad Height: 2228mm height approx
- 4 Quad Height: 2970mm height approx
- 5 Quad Height: 3713mm height approx
Please supply artwork in one 'spread' that is all pages side-by-side as one document. Each panel has a width of 758mm wide, thus making the total document width 2274mm wide. Please ensure you add 5mm of bleed around the whole document and include crop marks.
The height of the artwork will depend on the height of the pop up tower that is required (see sizes above). Artwork templates are available for this stand in Adobe Illustrator and Quark Express formats by clicking on the download tab above.
Please set up all artwork as CMYK colour mode with a minimum resolution of 150dpi at full size. If setting up artwork at a reduced scale, please increase resolution for your pop up tower accordingly. For example, 300dpi for half size artwork or 600dpi for full size artwork as a minimum.
Product Technical Information and Instructions
Please click on the download tab above to access detailed technical specification and assembly instructions for the pop up tower.