Original 3 Banner Stand


Quick Summary

See More
  • Easy-to-use external locking mechanism
  • Wide footprint for extra stability
  • Fast graphic change
  • Suitable for graphics from 160 - 450 microns.


Printing Required:
Required Width:
£189.00 tax excluded
£226.80 (tax inclusive)

More Info

The Excaliber banner stand is one of the most feature-rich, stylish display stand in it's class. It incorporates a very sturdy base unit which is available in single or double sided versions and four different widths.

The graphic on the Excaliber banner stand up to 1200mm wide is printed using new HP Vivera lightfast inks at an astonishing 2440dpi onto a completely opaque polyester film specifically designed for use with roller banners.

The 'Opal Jet' polyester film has a thickness of 125 microns and is over-laminated with a scratch resistant 125 micron film to give a finished graphic thickness of 250 microns. The scratch resistant crystal film gives a superb, uniform finish to the printed graphic which will resist minor scratches and scuffs.

If you want to go up to the massive 2000mm width, then we use our state of the art Vutek flat bed printer which prints onto blockout PVC, using UV cured inks which don't contain VOC's that can be harmful for the environment. Please note that if you order different widths of bases which includes the 2000mm wide base then it would be recommended that you request for them all to be printed onto the blockout PVC in order to maintain consistency with the prints.

The Excaliber is supplied with a universal grippa rail, which provides peace of mind that the graphic cannot become detatched from rail and a telescopic pole that can be fixed a different heights. The padded bag supplied with the unit is high quality and will help protect the stand from knocks whilst in transit.

Only the 800mm and 1000mm wide stands are available double-sided


Artwork Requirements - design templates are also available from our download tab above

Size:800mm, 1000mm, 1200mm or 2000mm wide x 2430mm tall

Resolution:We suggest no less than 150dpi at full size. Please increase resolution accordingly to allow for any enlargement should you set artwork at a reduced-scale.

Colour Mode:Supply artwork in CMYK mode only

Important Info:The bottom 300mm of the 2430mm page height is non-viewable and you should ensure thatall viewable information is raised up, above this region of the artwork. We suggest that the background colour or any background images run all of the way into the non viewable region, down to the bottom of the page.

Files types supported: Please save files as JPG, Tiff or PDF




User Reviews

Add your review

No customer comments for the moment.

Only registered users can post a new comment.