FastFrame™ is a flexible modular exhibition display system designed to adapt as your requirements change.
A range of connectors and support feet allows individual FastFrame panels to be joined together to create
straight display walls, corners, angled layouts, vertically stacked structures and more complex exhibition
stand configurations.
FastFrame panels can be linked side-by-side, connected at angles or stacked vertically using the appropriate
connectors. This makes it possible to combine standard frame sizes to create larger display walls and
bespoke modular layouts without the need for tools.
Choosing the correct components can be confusing if you're new to FastFrame. If you have an exhibition
space to fill or a particular stand layout in mind, our team can help identify the frames, connectors and
support feet required to build it.
FastFrame™ Connectors
Extend your display by adding additional width, height or depth.
Stack compatible FastFrame units vertically to create taller display walls.
Create straight runs, corners, angled displays and multi-panel layouts.
Simple modular components make FastFrame displays easy to reconfigure for different spaces.
FastFrame™ Support Feet
Provide support and stability to individual and linked FastFrame panels.
Different foot styles suit different positions within a display layout.
Full, half, middle and compact feet allow the support arrangement to suit the configuration.
Available FastFrame™ Connectors
45° Connector Kit FF-45C
Used at the top and bottom of FastFrame panels to create angled connections.
90° Connector Kit FF-90C
Connects two FastFrame units at a right angle to create corners, L-shaped displays and modular booth layouts.
Middle Connector Kit FF-90MIC
Provides additional support at larger 90-degree joins and helps reduce visible gaps between connected frames.
Left Internal Corner Kit FF-90LIC
Used to form internal left-hand 90-degree corners in more complex modular layouts.
Right Internal Corner Kit FF-90RIC
Used to form internal right-hand 90-degree corners in more complex modular layouts.
Arch Kit FF-ACC
Used when connecting wall panels to overhead sections to create FastFrame arch structures.
Arch Brace Kit FF-ABK
Provides additional bracing and support when constructing FastFrame arch configurations.
Cross Connector Kit FF-CC
Used to join four FastFrame panels at a central cross junction.
T-Shape Connector Kit FF-TC
Connects three FastFrame panels at 90 degrees to create a T-shaped configuration.
Y-Shape Connector Kit FF-YC
Used to join three FastFrame panels around a central point to form a Y-shaped layout.
2-Way Connector FF-2WC
Used to securely link FastFrame units stacked vertically to create taller display walls.
It can also provide additional strength when joining frames side-by-side.
4-Way Connector FF-4WC
Used to connect multiple FastFrame panels in a straight-line configuration for larger display walls and extended backdrops.
Available FastFrame™ Support Feet
Full Feet FF-FF
Connect to the outer edges of a FastFrame panel to provide front and rear support.
Dimensions: 50 × 99 × 400mm.
Side Half Feet Pair FF-SHF
Positioned in line with the display, making them useful where a reduced floor footprint is required.
Dimensions: 50 × 98 × 220mm.
Middle Full Foot FF-MFF
Supports FastFrame panels where two units are joined together.
Dimensions: 50 × 89 × 400mm.
Middle Half Foot FF-HFM
Supports joined frames where support is required predominantly on one side of the display.
Dimensions: 51 × 89 × 200mm.
Small Middle Foot FF-SMF
Compact support foot used between joined FastFrame units where a full-depth middle foot isn't required.
Dimensions: 40 × 89 × 97mm.
Need a taller FastFrame display?
Compatible FastFrame units can be stacked vertically using the FF-2WC 2-Way Connector.
This allows standard frame sizes to be combined to create taller modular display walls.
Depending on the layout, a single SEG fabric graphic can also be produced to span multiple connected
FastFrame units for a more seamless appearance.
Not sure which FastFrame™ components you need?
Tell us the size of your exhibition space and the layout you would like to create. Our team can help
calculate the FastFrame panels, connectors and support feet required for your display.
FastFrame is designed to grow with your requirements, allowing frames, graphics and accessories to be
reused and reconfigured for different exhibition spaces.
