Seen it cheaper?
Challenge us to beat that price!
The Horizon Banner Stand is the largest outdoor banner stand in our range. The frame can expand open to an enormous 2.4M tall x 2.5M wide in order to create a huge display area. The Horizon Banner can be provided with one or two prints in order to make either a single or double-sided display.
The Horizon Banner Stand is specifically designed for use in exterior locations and is designed for use in light to moderate winds without blowing over.
The substantial framework is made from aluminium, which is supported by two large, hollow plastic bases that can be filled with sand or water for ballast.
The printed graphic for the Horizon banner is produced using a durable polyester fabric material that is resistant to fading.
This display comes complete with a premium foldable fabric graphic, offering the same impressive large-format impact as traditional PVC banners—without the bulk. The lightweight material folds neatly for transport, making it far easier to carry, pack, and assemble on-site.
Printed using a high-quality dye-sublimation process, the ink is infused directly into the fibres of the fabric rather than sitting on the surface. This ensures long-lasting, vibrant colours that won’t crack, peel or run, even during outdoor use. The result is a durable, travel-friendly graphic that supports fast setup, efficient logistics and repeat use across multiple events.
Each Horizon base can be filled with up to 28 litres of water, providing approximately 56kg of ballast when used as a pair—or even more when filled with sand. This added weight helps stabilise the display during outdoor use.
Designed for light outdoor environments, the Horizon Banner Stand is suitable for wind speeds of around 10–12mph (16–18km/h), equivalent to a gentle breeze. It is not recommended for exposed or high-wind locations.
The graphic is printed onto a durable, outdoor-grade polyester fabric, using a dye-sublimation process that embeds the ink directly into the fibres. This ensures rich colour, resistance to cracking or peeling, and long-lasting performance even in outdoor conditions. The edges feature a reinforced double-thickness hem with eyelets placed at regular intervals along the top and bottom to securely attach the graphic to the frame.
To maintain a smooth, tensioned appearance, strong metal springs connect the lower edge of the graphic to the support feet, pulling the fabric taut across the display.
The Horizon Banner Stand supports one or two printed graphics mounted back-to-back using the same frame. Both graphics are produced on dye-sublimated polyester fabric with reinforced seams and eyelets positioned along the top and bottom for secure installation. Double-sided configurations provide increased exposure in open outdoor environments and high-traffic pedestrian areas.
| Weight (Approx) | 13.4kg when empty 69.4kg when both bases are filled with water |
|---|---|
| Dimensions (HxWxD) | 3000 x 2500 x 800mm |
| Freestanding or Mountable | Free Standing |
| Single Sided or Double Sided | Single Sided Double Sided |
| Print method | UV Printing |
| Waterproof | Yes |
| Resolution | 1080dpi |
| Recyclable | Aluminium frame can be recycled |
| Material | Blockout PVC |
Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support
