The outdoor tensioned X banner is perfect for advertising at outdoor events and fairs or can be used as a point of sale display for retail shops. The water fillable base provides stability in high traffic environments when completely filled and allows the banner stand to be used in wind speeds of Beaufort Scale 4 (moderate breeze of 13-18mph).
Outdoor Durable X Banner
The tension X banner stand is a tough and durable free standing banner display that is ideal for use in high traffic indoor environments or outdoors in wind speeds of up to 30kmh.
The graphic measures 800mm wide x 1800mm high and is printed onto a durable 600gsm blockout PVC that is resistant to water and fading.
Attaching the print to the frame is quick and easy. Simply hook the eyelets in the corners of the graphic onto the hooks at the end of the glass fibre rods.
Additional prints can be purchased separately at any time should you wish to update your message.
18L Capacity Support Base
The support base for the outdoor tensioned X banner is made from tough, moulded PVC and has a removeable stopper on the top.
For indoor use, the display can be used without any additional weighting or for outdoor use, you can add up to 18 Litres of water to increase the stability.
When using the stand is sub zero temperatures for long periods of time where freezing could be an issue, we recommend the use of sand rather than water for ballast.
Optional Carry Bags
Outdoor tensioned X banners are supplied packed in cardboard cartons with the printed banner being packed separately.
Carry bags are a worthwhile addition if you are using the display for event purposes where it will be transported to different locations.
A set of optional carry bags is available as an accessory.
One bag holds the plastic support base for the stand and the other bag is for storage of the aluminium and glass fibre support poles.
Single Or Double Sided Banner Display
Outdoor tension X banners can be supplied with a print on one side or both sides to create a double sided display.
Using the outdoor tension X banner with two prints to create a double sided banner stand is ideal for advertising outside retail stores where traffic can be passing from both directions.
The frame comes with 6 glass fibre rods. Two rods are used at the top of the display and either 2 or 4 rods are used on the bottom of the display depending on whether the stand is being used single or double sided.
6 glass fibre rods as provided as standard even when purchasing the display with one print.