Vector SEG Free Standing LED Light Box

Free standing LED lightbox Displays. Standard and custom sizes available.
  • Available in 3 standard freestanding frame sizes
  • Custom sizes can be manufactured on request
  • Choice of 3 different frame profile depths
  • Powerfull internal edge-lit LED backlighting
  • SEG Fabric tensioned graphics push-fit into frame
As low as £340.00
  • Tuesday 26th Octoberstandard
  • Thursday 28th Octobereconomy
  • Friday 22nd Octoberexpress

Vector SEG Free Standing LED Light Boxes provide the perfect way to display stunning backlit illuminated graphics. Our aluminium vector frame profile is available in a choice of depths and a choice of standard frame sizes. We can also bespoke manufacture this type of free standing lightbox in almost any custom size on request.


   Modern SEG Frame System

Our free standing LED light boxes use our Vector SEG frame profile that is made from 6063 T6 anodised aluminium and available in a choice of three depths. Choose from 100mm, 125mm or 150mm frame profile depth depending on your preference.

The aluminium frame is supplied in manageable sections that simply push fit together and secure in place with a hex key.

The SEG lightbox frame is designed specifically for use with fabric graphics that are sewn with a silicone edge around the perimeter. The graphics fit almost flush with the edge of the freestanding lightbox frame in order to provide a modern, contemporary backlit display.


   Edge Lit LED Illumination

The internal backlighting is achieved using LED lights that are built into the interior perimeter of the SEG free standing LED lightbox frame.

The LED lights disperse bright light evenly inside the frame and provide uniform coverage throughout the entire face of the graphic.

Our commercial grade LED lights are designed for over 50,000 hours of use which is over 50 times the lifespan of a traditional indcandescent bulb.

LED lights are highly efficient and environmentally friendly due to the low relative power consumption compared to traditional lighting technologies.



   Eco Friendly Fabric Graphics

SEG (Silicone Edge Graphics) are printed onto a specialist polyester fabric that is designed for backlighting.

Our polyester based fabric is fully recyclable with other textiles and our dye sublimation printing process uses no harmful solvents (VOC's).

SEG fabric graphics are quick and easy to install into the freestanding lightbox frame in minutes. Simply push fit the edge of the fabric into the channel on the frame to achieve a smooth, flat edge to edge tensioned finish.

You can install a print onto one or both sides of the frame depending on whether you want to create a single or double sided display. If ordering a single sided display we provide an additional plain fabric to blank off the reverse side of the frame.

Replacement fabric graphics can be purchased at any time so the display can be updated for different promotions or events when required.



   Stable Support Feet

Our free standing vector lightbox frames use stable support feet made from aluminium. The support feet sit almost flush to the ground so they do not present a trip hazard and are safe for use in public and commercial spaces.

The support feet of the SEG free standing LED lightbox also feature a smooth, contoured shape with no sharp edges or corners.


   Cable Management Port

The SEG free standing light box is powered from a low voltage transformer and is supplied with a 3-pin UK mains plug. Power to the internal LED lights is made through a small port at the base of the frame.

The low voltage transformer is compatible for use with electrical supplies ranging from 110-250V so can be used internationally in conjunction with the relevant plug socket adapter.



SEG Free Standing Lightbox UK   Made in the UK

Our SEG free standing lightbox frames are manufactured to order in the UK. Standard or custom size lightbox frames are usually available in as little as 2-3 working days.

Printing and sewing of the SEG lightbox fabric graphics is also handled in-house by our own experienced team.

SEG Free Standing LED Light Box Support   Helpful Advice & Support

With in house manufacture and graphics production our team are always available to offer helpful advice and support.

Whether it is a technical question about our free standing SEG lightboxes or assistance with the design and set up of your artwork. Just get in touch with a member of our team who will be hapy to help.

More Information
WaterproofIndoor use only
Scratch-resistanceDurable fabric graphics resistant to scratching
Print methodDye-sublimation or UV digital process on request
PrintingPolyester backlit display fabric
Dimensions (HxWxD)2M Tall. 1M, 2M or 3M Width. Custom sizes available on request

View our product video

Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account


How to supply and transfer your artwork

Once you have placed an order for a printed product, we will need you to provide us with your artwork, so we could start the production. It's important that any artwork you provide is compatible for the product(s) that you have ordered. You can find instructions regarding particular artwork requirements on the relevant product pages of our website.

If you can't provide artwork at the correct size or format then please get in touch. We offer a full in-house design service for all products and we can provide an individual quote based on your needs and requirements. Just email us with your requirements by contacting our designer directly at or feel free to use our online chat facility for a quick consultation.

You can upload your artwork in one of several ways

  • Go to your account’s dashboard and click on an “Upload” button located next to your order number.
  • Send your artwork directly to
  • Send your artwork to us by one of the many free file transfer websites (we recommend
  • Send your artwork to us using our own secure FTP server (details below)

username: ftpc
password: monday679

If you send your artwork via email, file transfer service or FTP, please send an email to and provide your order number along with any other specific instructions.

When we receive your artwork we will update you to let you know that your files have been received. We will also confirm that the artwork you have provided is suitable for the products that you have ordered.

Is a signature required on delivery of my order?

We use a range of courier companies to deliver our exhibition stands and other products. Most couriers will require a signature on the delivery of your order to confirm the date and time of the delivery (and that the goods are received in good condition).

Normally we will email the tracking information for your order on the evening of the day of dispatch so that you can know to expect the delivery. If you want to check the progress of the delivery then you can enter the tracking information online for an update or call the telephone number provided.

If no-one is available to sign for your delivery then the courier will normally leave a card to say that a delivery was attempted and would then take the parcel away. The delivery is normally re-attempted the next working day.

Depending on the courier, the delivery could be re-attempted two or three times before the parcel would eventually be returned to us. If the courier attempts delivery on multiple occasions with no success resulting in the parcel being returned then we can re-dispatch the parcel again for you but would bill the carriage cost again.

Sometimes we are asked if the courier can telephone in advance of the delivery being made. Unfortunately this is not possible because the couriers are not generally provided with mobile telephones. All instructions tend to be relayed to the courier by the depot via a hand held computer terminal that the driver carries.

If you need to receive a delivery on a particular day but are not going to be around to sign for the parcel then the best advice we can give is to write a note explaining that you are expecting a delivery but are not around to receive it. You can request the courier leaves the parcel with no signature or with a neighbor. We would advise that you write the consignment note of the parcel on the letter and sign it.

Ultimately it is down to the drivers discretion whether to leave the parcel and so we cannot accept responsibility for late deliveries if there is no one available to accept the order when the delivery is made.

How long does production and delivery take?

For most items that are printed, the standard production time is 5 working days.

Based on standard production if an order arrives on a Monday morning (first thing) then the goods should be dispatched no later than the following Monday.

If orders are placed later in the day then we would not normally class that day as a full day’s production time and therefore an order placed on a Monday afternoon would be dispatched no later than a week the following Tuesday.

For rush orders, we offer an express production service whereby the item can printed and dispatched in 1-2 working days. An item placed on express production on a Monday would generally ship no later than Tuesday the day after. We recommend you call us prior to placing an express order to confirm your delivery schedule.

We offer a variety of courier services selectable from the checkout on our website. Standard delivery is normally next working day from the day of dispatch (so an order dispatched on a Tuesday would be delivered on Wednesday).

We also offer timed delivery services (pre-noon, pre 10.30am, pre 9am etc) at additional costs.

Please note that although we always do everything within our power to ensure that goods are dispatched on-time, there can be rare occasions whereby production could be delayed due to circumstances outside of our control. Such circumstances could involve a power outage, equipment failure etc.

With regards to courier delivery times, there is no insurance or consequential insurance for late deliveries with next day couriers. We would always recommend that you arrange for a delivery to be made in advance of your required date just in case!

For no-fail deliveries we can arrange for a dedicated vehicle and driver – please call for prices.

Can you colour match to Pantone references?


The Pantone colour scale is an industry standard series of reference colours for use in the printing industry.

Pantone or spot colours are normally used by lithographic or screen printers when printing items with a limited number of colours (for example a letterhead, or stationary). Pantone ink is purchased by the printer who then creates a screen or plate specifically for that colour ink.

We use a CMYK (full colour) process of printing rather than a spot colour method. With a CMYK print process, Cyan, Magenta, Yellow and Black are mixed by layering ink on top of each other to create a full-colour image. Sometimes other colours like light cyan and light magenta are also used to improve print quality.

We cannot guarantee to match all Pantone colours because some Pantone’s contain pigments that push the colour outside of the spectrum of colours available with CMYK inks.

An example would be Pantone 021 orange which is a very bright, almost neon colour. It is impossible to get a close match to this colour with CMYK printing because the colour is too bright.

There are many other colours in the Pantone spectrum that are relatively easy to match but also some that are impossible to closely match. Pantone sell a solid to process guide book which is useful because the Pantone colour is shows next to the nearest CMYK colour as two separate colour chips. If you can access a Pantone solid to process guide book then you can see at a glance how closely your pantone colour can be matched with a CMYK printing process.

All artwork supplied should be set as CMYK colour mode, not Pantone spot colour. If you do not have a Pantone solid to process guide book and need some advice as to the best CMYK colour value to use in the artwork, please call and we can help.

If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article. The cost is £20 and includes delivery of the proof to a mainland UK address.

What resolution does my artwork need to be?

As a rule of thumb, we recommend that artwork resolution should be 150dpi or greater at full scale for a large format print (anything A2 or larger).

If you are designing your artwork at a reduced scale (say half or quarter size) then the resolution of the artwork needs to be increased proportionally so that when the file is blown-up for printing, the quality is high enough to allow for it.

So, if setting your artwork at half size then double the resolution to 300dpi or if setting the artwork at quarter size then quadruple the resolution to 600dpi!

What if my image is not big enough for 150dpi output at full size?

When printing images at very large sizes, it is not uncommon that the original file be unavailable at a large enough size to provide 150dpi output and this does not mean that you cannot use the image! In fact much smaller images can sometimes be OK for print.

Bear in mind factors that determine if the image is acceptable:-

  1. The viewing distance of the image (how closely it will be examined)
  2. The content of the image itself (does it contain lots of intricate detail or is it a more abstract image).

Most displays have a viewing distance of at least a couple of Metres and so a large background image need not contain pin-sharp detail. If the image is abstract or does not contain precise detail then you can ‘get away’ with using a smaller image.

If your image is small then you can up-sample it in an application like Photoshop which increases the image size by splitting the pixels (interpolating) into more pixels. A byproduct of this process is the image can become ‘softer’ and it is therefore a good idea to zoom-in on the picture at approximately finished size on screen and then stand back from the display to gain an impression of what the printed result would be like.

If you have concerns about image quality then let us know about it when you submit your artwork and one of our team can take a look for you.

What types of artwork files can you accept?


We support most ‘industry-standard’ artwork file types. Examples of supported formats include:-

  • Adobe Photoshop
  • Adobe Indesign
  • Adobe Illustrator
  • Quark XPress

We also accept generic artwork formats including:-

  • JPG
  • TIFF
  • EPS
  • PDF
  • BMP
  • PNG

When supplying artwork from the original design package (for example an Adobe Indesign file), it is important to send over all linked images and fonts as well as the Adobe Indesign document itself.

If you are exporting artwork from a design package into a generic format such as PDF then there is generally no need to supply artwork components such as images and fonts separately unless you need us to re-open and edit the file for you.

Most people would typically supply us with the exported generic file rather than the original artwork file and links.

Available Payment Methods

We accept most common credit cards including Mastercard, Visa and American Express via the payment gateway on our website. We also can accept payments via PayPal.