A Versatile Advertising Flag
Wind Dancer flags are ideal for use at exhibitions, events, festivals, and fairs and can be assembled on any relatively flat ground whereby they are stable enough to withstand wind speeds of up to 18MPH when weighted with sand or water.
The pole of the Wind Dancer flag is made from lightweight aluminium and features a telecopic design which allows the assembled height of the flag to be locked in a choice of 3 x positions.
- Minimum Height: 2900mm
- Intermediate Height: 4170mm
- Maximum Height: 5300mm
The width of the flag print is fixed at 1000mm wide regardless of the height that is selected.
Digitally Printed Flag Graphics
Wind Dancer flag graphics are printed onto a 115gsm polyester fabric and are printed to the required size depending on the size of flag you order.
The flag graphic can be printed single sided or double sided. Single sided flag prints are made from one piece of material and the image which is printed onto the face will show through to the reverse side of the flag with around 90% opacity.
Double sided flag prints are produced by printing two separate pieces of fabric that are sewn back to back with a layer of silver, light blocking fabric in between. The layer of light blocking fabric ensures that there is no show through between the front and rear faces of the flag.
Although single sided flags can be viewed from both sides, the content as viewed on the reverse will be a mirror image of what is printed onto the front. If you want information such as text to be readable from both sides, we recommend opting for our double sided printing option.
|