ILLUMIGO™ Modular & Lite Mag Lightbox Connectors

Connectors that allow you to join IllumiGo modular lightboxes together
  • Connects IllumiGo Modular Lightbox frames quickly and securely
  • Tool-free assembly for fast, hassle-free setup
  • Durable, lightweight components designed for repeated use
  • Available in corner and T-shape configurations
  • Ensures stable alignment of IllumiGo illuminated displays
£6.00 £5.00

Seen it cheaper?

Challenge us to beat that price!

Contact our sales team now
Order and submit artwork within to get it by...
  • Wednesday 7th Octoberstandard
  • Friday 9th Octobereconomy
  • Thursday 8th Octoberexpress

ILLUMIGO™ Modular & Lite Mag Lightbox Connectors

Create corners, T-shaped formations and more complex illuminated displays with purpose-designed ILLUMIGO™ lightbox connectors. These lightweight, reusable fittings allow compatible ILLUMIGO™ Modular and Lite Mag frames to be joined securely without permanent fixings or complicated tools.

Tool-Free Fitting Designed for quick installation and repeated exhibition use.
Modular Layouts Create 90° corners, T-shapes and multi-directional displays.
Reusable Hardware Reconfigure your display for different stand sizes and future events.
System Specific Some connectors fit both systems while others are profile-specific.

Modular or Lite Mag? Check Compatibility Before Ordering

ILLUMIGO™ Modular uses a deeper 120mm frame, while ILLUMIGO™ Lite Mag uses a slimmer 80mm profile. The 90° Top Corner Connector and T-Shape Connector can be used with both systems, while the four-piece middle inside corner connectors are specific to each frame type.

90° Top Corner Connector

The 90° Top Corner Connector [ILLGO-90TC] joins two ILLUMIGO™ lightbox frames at right angles, making it ideal for creating L-shaped and U-shaped displays.

The connector spans the top of both adjoining frames to keep the corner aligned and secure. One frame sits in front of the other, so a small section of the rear graphic is concealed where the two lightboxes meet.

Compatible with: ✓ ILLUMIGO™ Modular
✓ ILLUMIGO™ Lite Mag
ILLUMIGO Modular and Lite Mag 90 degree top corner connector

T-Shape Connector

The T-Shape Connector [ILLGO-TC] allows three ILLUMIGO™ lightbox frames to form a T-shaped arrangement, creating a branch from a main illuminated display wall.

This is particularly useful for multi-directional exhibition stands, retail installations and modular layouts where different areas need to face separate directions.

Compatible with: ✓ ILLUMIGO™ Modular
✓ ILLUMIGO™ Lite Mag
ILLUMIGO Modular and Lite Mag T-shape connector

Lite Mag 90° Middle Inside Corner Connectors – Pack of 4

The ILLUMIGO™ Lite Mag 90° Middle Inside Corner Connectors [ILLGO-90MIC] are designed specifically for the slimmer 80mm Lite Mag frame.

Supplied as a set of four connectors, they allow two Lite Mag frames to meet at 90° without positioning one complete frame in front of the other. This keeps both front graphics fully visible and creates a cleaner visual corner at the front of the display.

Because the frames meet along their inner edges, a small open space remains at the rear of the corner.

ILLUMIGO™ Lite Mag Only Designed specifically for the 80mm Lite Mag profile.
ILLUMIGO Lite Mag 90 degree middle inside corner connectors pack of four

Modular 90° Middle Inside Corner Connectors – Pack of 4

The ILLUMIGO™ Modular 90° Middle Inside Corner Connectors [ILLGO-MOD-90MIC] perform the same style of corner connection for the deeper 120mm ILLUMIGO™ Modular frame.

Rather than overlapping one complete frame in front of another, the inside faces of the two profiles meet together. This means both front graphics remain visible right up to the corner, with a small opening created at the rear.

ILLUMIGO™ Modular Only Designed specifically for the deeper 120mm Modular profile.
ILLUMIGO Modular 90 degree middle inside corner connectors

Which ILLUMIGO™ Connector Do I Need?

Connector Modular Lite Mag Typical Use
90° Top Corner [ILLGO-90TC] ✓ ✓ L-shaped and U-shaped layouts
T-Shape [ILLGO-TC] ✓ ✓ T-shaped and branching layouts
Lite Mag Middle Inside Corner [ILLGO-90MIC] – ✓ Lite Mag 90° corner with no front graphic overlap
Modular Middle Inside Corner [ILLGO-MOD-90MIC] ✓ – Modular 90° corner with no front graphic overlap

Do I Need a Connector to Join Lite Mag Frames Side by Side?

Not normally. ILLUMIGO™ Lite Mag includes magnets within the frame, allowing adjacent units to locate neatly against one another when creating a simple straight display run.

Connector accessories become particularly useful when creating corners, T-shaped formations and other structured layouts.

Free Planning & Design Service for ILLUMIGO™ Displays

Planning a larger ILLUMIGO™ Modular or Lite Mag installation and not sure which connectors you need? We can help.

Give us the dimensions and intended shape of your exhibition stand or display area and our team can help work out a suitable configuration, identify the required frames and connectors and provide a bespoke quotation.

Frequently Asked Questions

Do all ILLUMIGO™ connectors fit both Modular and Lite Mag?

No. The 90° Top Corner Connector and T-Shape Connector can be used with both systems, while the middle inside corner connectors are specific to either the 80mm Lite Mag or 120mm Modular frame.

What is the difference between the two 90° corner methods?

The Top Corner Connector positions one complete frame in front of the other, which hides a small section of one graphic. The Middle Inside Corner Connectors allow the inner edges of the frames to meet, keeping both front graphics visible.

Do Lite Mag lightboxes need connectors when positioned side by side?

No. Lite Mag frames contain integrated magnets for simple side-by-side displays.

Can the connectors be reused?

Yes. They are designed for reusable modular displays and can be removed and refitted when you change the configuration.

Can you help me plan a complete ILLUMIGO™ display?

Yes. Send us the dimensions and intended layout of your space and we can help identify the required frames, connectors and accessories.

View our product video

Any questions? Please just contact a member of our friendly team who will be happy to provide obligation-free advice and support

Product Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

FAQs

How to supply and transfer your artwork

Once you have placed an order for a printed product, we will need you to provide us with your artwork, so we could start the production. It's important that any artwork you provide is compatible for the product(s) that you have ordered. You can find instructions regarding particular artwork requirements on the relevant product pages of our website.

If you can't provide artwork at the correct size or format then please get in touch. We offer a full in-house design service for all products and we can provide an individual quote based on your needs and requirements. Just email us with your requirements by contacting our designer directly at [email protected] or feel free to use our online chat facility for a quick consultation.

You can upload your artwork in one of several ways

  • Go to your account’s dashboard and click on an “Upload” button located next to your order number.
  • Send your artwork directly to [email protected]
  • Send your artwork to us by one of the many free file transfer websites (we recommend www.wetransfer.com)
  • Send your artwork to us using our own secure FTP server (details below)

https://printdesigns.de.quickconnect.to/

username: ftpc
password: monday679

If you send your artwork via email, file transfer service or FTP, please send an email to [email protected] and provide your order number along with any other specific instructions.

When we receive your artwork we will update you to let you know that your files have been received. We will also confirm that the artwork you have provided is suitable for the products that you have ordered.

Is a signature required on delivery of my order?

We use a range of courier companies to deliver our exhibition stands and other products. Most couriers will require a signature on the delivery of your order to confirm the date and time of the delivery (and that the goods are received in good condition).

Normally we will email the tracking information for your order on the evening of the day of dispatch so that you can know to expect the delivery. If you want to check the progress of the delivery then you can enter the tracking information online for an update or call the telephone number provided.

If no-one is available to sign for your delivery then the courier will normally leave a card to say that a delivery was attempted and would then take the parcel away. The delivery is normally re-attempted the next working day.

Depending on the courier, the delivery could be re-attempted two or three times before the parcel would eventually be returned to us. If the courier attempts delivery on multiple occasions with no success resulting in the parcel being returned then we can re-dispatch the parcel again for you but would bill the carriage cost again.

Sometimes we are asked if the courier can telephone in advance of the delivery being made. Unfortunately this is not possible because the couriers are not generally provided with mobile telephones. All instructions tend to be relayed to the courier by the depot via a hand held computer terminal that the driver carries.

If you need to receive a delivery on a particular day but are not going to be around to sign for the parcel then the best advice we can give is to write a note explaining that you are expecting a delivery but are not around to receive it. You can request the courier leaves the parcel with no signature or with a neighbor. We would advise that you write the consignment note of the parcel on the letter and sign it.

Ultimately it is down to the drivers discretion whether to leave the parcel and so we cannot accept responsibility for late deliveries if there is no one available to accept the order when the delivery is made.

How long does production and delivery take?

For most items that are printed, the standard production time is 5 working days.

Based on standard production if an order arrives on a Monday morning (first thing) then the goods should be dispatched no later than the following Monday.

If orders are placed later in the day then we would not normally class that day as a full day’s production time and therefore an order placed on a Monday afternoon would be dispatched no later than a week the following Tuesday.

For rush orders, we offer an express production service whereby the item can printed and dispatched in 1-2 working days. An item placed on express production on a Monday would generally ship no later than Tuesday the day after. We recommend you call us prior to placing an express order to confirm your delivery schedule.

We offer a variety of courier services selectable from the checkout on our website. Standard delivery is normally next working day from the day of dispatch (so an order dispatched on a Tuesday would be delivered on Wednesday).

We also offer timed delivery services (pre-noon, pre 10.30am, pre 9am etc) at additional costs.

Please note that although we always do everything within our power to ensure that goods are dispatched on-time, there can be rare occasions whereby production could be delayed due to circumstances outside of our control. Such circumstances could involve a power outage, equipment failure etc.

With regards to courier delivery times, there is no insurance or consequential insurance for late deliveries with next day couriers. We would always recommend that you arrange for a delivery to be made in advance of your required date just in case!

For no-fail deliveries we can arrange for a dedicated vehicle and driver – please call for prices.

Can you colour match to Pantone references?

 

The Pantone colour scale is an industry standard series of reference colours for use in the printing industry.

Pantone or spot colours are normally used by lithographic or screen printers when printing items with a limited number of colours (for example a letterhead, or stationary). Pantone ink is purchased by the printer who then creates a screen or plate specifically for that colour ink.

We use a CMYK (full colour) process of printing rather than a spot colour method. With a CMYK print process, Cyan, Magenta, Yellow and Black are mixed by layering ink on top of each other to create a full-colour image. Sometimes other colours like light cyan and light magenta are also used to improve print quality.

We cannot guarantee to match all Pantone colours because some Pantone’s contain pigments that push the colour outside of the spectrum of colours available with CMYK inks.

An example would be Pantone 021 orange which is a very bright, almost neon colour. It is impossible to get a close match to this colour with CMYK printing because the colour is too bright.

There are many other colours in the Pantone spectrum that are relatively easy to match but also some that are impossible to closely match. Pantone sell a solid to process guide book which is useful because the Pantone colour is shows next to the nearest CMYK colour as two separate colour chips. If you can access a Pantone solid to process guide book then you can see at a glance how closely your pantone colour can be matched with a CMYK printing process.

All artwork supplied should be set as CMYK colour mode, not Pantone spot colour. If you do not have a Pantone solid to process guide book and need some advice as to the best CMYK colour value to use in the artwork, please call and we can help.

If you have very precise colour matching requirements for your artwork then we recommend purchasing a reduced-scale hard copy proof prior to printing the finished article. The cost is £20 and includes delivery of the proof to a mainland UK address.

What resolution does my artwork need to be?

As a rule of thumb, we recommend that artwork resolution should be 150dpi or greater at full scale for a large format print (anything A2 or larger).

If you are designing your artwork at a reduced scale (say half or quarter size) then the resolution of the artwork needs to be increased proportionally so that when the file is blown-up for printing, the quality is high enough to allow for it.

So, if setting your artwork at half size then double the resolution to 300dpi or if setting the artwork at quarter size then quadruple the resolution to 600dpi!

What if my image is not big enough for 150dpi output at full size?

When printing images at very large sizes, it is not uncommon that the original file be unavailable at a large enough size to provide 150dpi output and this does not mean that you cannot use the image! In fact much smaller images can sometimes be OK for print.

Bear in mind factors that determine if the image is acceptable:-

  1. The viewing distance of the image (how closely it will be examined)
  2. The content of the image itself (does it contain lots of intricate detail or is it a more abstract image).

Most displays have a viewing distance of at least a couple of Metres and so a large background image need not contain pin-sharp detail. If the image is abstract or does not contain precise detail then you can ‘get away’ with using a smaller image.

If your image is small then you can up-sample it in an application like Photoshop which increases the image size by splitting the pixels (interpolating) into more pixels. A byproduct of this process is the image can become ‘softer’ and it is therefore a good idea to zoom-in on the picture at approximately finished size on screen and then stand back from the display to gain an impression of what the printed result would be like.

If you have concerns about image quality then let us know about it when you submit your artwork and one of our team can take a look for you.

What types of artwork files can you accept?

 

We support most ‘industry-standard’ artwork file types. Examples of supported formats include:-

  • Adobe Photoshop
  • Adobe Indesign
  • Adobe Illustrator
  • Quark XPress

We also accept generic artwork formats including:-

  • JPG
  • TIFF
  • EPS
  • PDF
  • BMP
  • PNG

When supplying artwork from the original design package (for example an Adobe Indesign file), it is important to send over all linked images and fonts as well as the Adobe Indesign document itself.

If you are exporting artwork from a design package into a generic format such as PDF then there is generally no need to supply artwork components such as images and fonts separately unless you need us to re-open and edit the file for you.

Most people would typically supply us with the exported generic file rather than the original artwork file and links.

Available Payment Methods

We accept most common credit cards including Mastercard, Visa and American Express via the payment gateway on our website. We also can accept payments via PayPal.